Description

Hypoxic BLU2Pro Indicator for GoPro Cameras

Take the guesswork out of the status of your GoPro Camera!

Stop relying on others and take control of your content creation. Know the exact status of your GoPro Camera when it’s mounted on your head!

BLU2Lite Record

Camera in the wrong mode?
You’ll know.

Battery or Card space running low?
We got that!

Another go around?
No more second guessing.

BLU2Lite GoPro Camera Status

How does it work?
Paired over Bluetooth Low Energy (BLE) the BLU2Lite regularly receives status updates from the camera and updates it’s three status LED. GoPro Inc.’s BLE implementation is super reliable.

The BLU2Lite was designed to use very little power, and you will not notice a difference in battery life of your camera.

Quick Start Video
The usage and the features of the BLU2Lite can best be understood from this quick start video.

HYPOXIC BLU2Lite
Designed for open face helmets

Features:

• Intuitive & standardized indications:
  • Red for record
  • Green for standby
  • Yellow for a warning or error
• Low Power, future compatible, Bluetooth Low Energy (BLE) Camera Indicator
• Rechargeable battery will last for months on a single charge.
• A slight shake or tilt wakes up the device with it’s internal accelerometer. No pressing buttons on the BLU2Pro is necessary.
• Shows catastrophic failures such as no card, camera too hot, no space left, and battery depleted with a flashing yellow.
• Shows catastrophic failures such as no card, camera too hot, no space left, and battery depleted with a flashing yellow.
• Indicates wrong mode, battery low, card space minimal, and SD rating check‡ warnings with a flashing yellow when record or standby is active.
• Upgradable to work with future GoPro Cameras.
• Responsive connectivity. *

Cameras Supported
Note: GoPro HERO 4k (2024) – The little small camera is not supported. All mainline cameras in the future should be able to be supported through updates.

GoPro MAX 2
GoPro HERO13 Black
GoPro HERO12 Black
GoPro HERO11 Black
GoPro HERO11 Mini
GoPro HERO10 Black
GoPro HERO9 Black
GoPro MAX
GoPro HERO8
GoPro HERO7
GoPro HERO6
GoPro HERO5 Session†
GoPro HERO5†
Reliability
Reliability was our primary design goal. BLU2Pro units have been in test since early 2021 and have hundreds upon hundreds of jumps under their belt.

BLU2Pro with GoPro HERO10 Recording

Reliability
Reliability was our primary design goal. BLU2Pro units have been in test since early 2021 and have hundreds upon hundreds of jumps under their belt..

Multi-Function Button
The multi-function button is used to control the BLU2Pro itself.

Uses
Put the unit in a deep sleep where the accelerometer will not wake it up. This is good for traveling with your setup.
Pair to a new camera.
Update the unit for future firmware updates.

BLU2 Install

Package Includes
1x BLU2Pro Indicator System
1x USB type C Charger cable
2x Led Clasps
1x Sticker
1x VHB Tape
1x Label with FCC Compliance
GoPro Camera NOT included

The BLU2Pro will fit into most ditter pockets. Its about 3mm thicker than a Quattro but is much skinnier and shorter. We recommend mounting it on an external camera plate if available and an unused ditter pocket if not.

For more information including mounting, the 2.5mm jack, battery life and availability please continue here.

Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO, and their respective logos are trademarks or registered trademarks of GoPro, Inc.

Additional information